Project | Unit | DMC-4065 | DMC-6065 | DMC-8065 |
Workbench area | mm | 4000×650 | 6000×650 | 8000×650 |
Maximum load-bearing capacity of workbench | kg | 6000 | 8000 | 10000 |
T-shaped slot (number of slots-slot width x slot pitch) | mm | 5-18×130 | 5-18×130 | 5-18×130 |
X/Y/Z axis travel | mm | 4150×650×650 | 6150×650×650 | 8150×650×650 |
Distance from spindle end face to worktable | mm | 150-800 | ||
Distance from spindle center to column guide surface | mm | 781 | ||
X/Y/Z axis rapid movement | m/min | 24/24/16 | ||
Spindle specifications | BT50 | |||
Spindle maximum speed | rpm | 5000 | ||
Spindle transmission mode | gear drive | |||
Gearbox output reduction ratio | High speed range: 1:1.02 / Low speed range: 1:3.11 | |||
X/Y/Z axis guide rail | X/Y: Ball rail Z: Hard rail | |||
Number of X-axis tracks | 3-rail/9-sliding block | |||
Transmission form | X: rack and pinion Y/Z : ball screw | |||
X/Y/Z axis positioning accuracy | mm | 0.03/0.01/0.01 | 0.01/0.01/0.01 | 0.05/0.01/0.01 |
Repeatable positioning accuracy of X/Y/Z axis | mm | 0.025/0.008/0.008 | 0.035/0.008/0.008 | 0.045/0.008/0.008 |
CNC system | Optional | Optional | Optional | |
main motor power | kw | 15/18.5 | ||
Tool magazine type | Pneumatic | Pneumatic | Pneumatic | |
Tool magazine capacity | 24 | 24 | 24 | |
Maximum tool diameter/length | mm | Φ112/300 | Φ112/300 | Φ112/300 |
Maximum tool weight | kg | 18 | 18 | 18 |
Spindle and gear cooling system | Standard constant temperature oil cooler | |||
Air demand | kg/cm² | ≥6 | ||
Air flow | m³/min | ≥0.5 | ||
Machine weight (approx.) | kg | 16000 | 20000 | 24000 |
Overall dimensions (length x width x height) | mm | 7500×3200×2500 | 9500×3200×2500 | 11500×3200×2500 |
● The main shaft gearbox achieves a larger speed range and torque through two-speed mechanical shifting. The internal gears of the gearbox adopt Taiwan's 5th grade precision cylindrical gear transmission, which has smooth transmission, low noise, impact load resistance and very high transmission stiffness. ability. The reduction ratios of the low-speed gear and high-speed gear of the gearbox are: 1:3.11 and 1:1.02 respectively.
● The machine tool is equipped with a constant-temperature oil cooler as standard: 1. To prevent the temperature of the bearings and gears from rising too high during operation. The constant-temperature oil cooler can be adjusted according to the climate in different areas to ensure the working accuracy of the machine tool and normal operation at each room temperature; 2. Fully lubricate bearings and gears, reduce wear and noise, and extend service life.
● Chain chip conveyor
● Spindle box balance: nitrogen balancing cylinder